Every so often the idea of squatting more often than once a week makes the rounds. Just within the last year Tony Gentilcore wrote a great article called Squat 4 Times Per Week Experiment, Matt Perryman wrote a fantastic book I think you’d like to read called Squat Every Day, and of course the Jon Broz mantra of squat every day continues to make the rounds.

Despite the popularity of this idea with squatting, no one wants to touch the topic when it comes to deadlifts. Apparently putting a barbell across your back and squatting with it is a more natural movement than picking something up off the floor. Doing the former is sure to pack muscle mass on your frame, and doing the latter will guarantee your spine shoots out your ass before you make it to thirsty Thursday.

On the contrary, I think you can deadlift frequently. In fact, if your goals lie in the regions of strength and/or muscularity, I think you might want to give frequently deadlifting a shot. To me it’s obvious why you would want to deadlift daily if you could, and in fact I can’t understand why someone wouldn’t want to pull that often. But if you’re wondering why you would want to, here are a few reasons:

• You’re going to get better at deadlifting. Practice makes permanent, or perfect, or potential, or whatever depending on who you ask. Either way more practice is a good thing, and the more you practice deadlifting the better you will get at it.
• Aside from squatting, there aren’t many ways you can utilize more muscle than a deadlift. Stress a lot of muscle with a lot of weight frequently, and you’re well on your way to packing on some mass.
• You’re going to improve in associated strengths, like grip. Deadlifting frequently is going to involve picking things up off the floor in ways other than a plain old barbell. As soon as you start introducing axles or pinch deadlifting, now you’re talking about strengthening otherwise totally neglected areas like your forearms. Have you ever seen a guy whose forearms have the same girth as his upper arms? Yeah, you want that.
• Cardio. That’s right. Cardio. Deadlifting lighter weights for high volume in short time frames (take 315 for 100 in 30 minutes and call me on Monday) is my favorite way to Lift Weights Faster.
• It’s the gym opposite of your life movements. Just as a good program seeks to balance push and pull, it’s good to balance your life movement with opposing movement in the gym. If you’re reading this, it’s a safe bet you spend too much time sitting – in the car, in front of the computer, at work, etc.- and the deadlift, moving into extension against resistance, is a perfect opposition movement to that.

Listen, it’s just a fact that deadlifting is awesome and doing it often is by definition more awesome. Sure, you could squat, but why would you do that when you can deadlift? I make no apologies for the fact that I don’t like squatting, and I do it the least I can possibly get away with.

Here are a few considerations that will help you pull it off:

• You might be able to do the same deadlift every day, but I wouldn’t recommend it. Instead, use testing and a range of variations to find the best testing variation every day. Simply changing the variation will not only mean you stress very different tissues, but it will also change everything else about how you lift like the load, sets, and reps.
• Acknowledge that you aren’t going to be able to lift at the same intensity day in and day out. Fortunately, there are two more metrics of progress you can use to vary your workouts. Intensity, volume, and density can all be tweaked and manipulated so that you can deadlift day after day. For example, you might lift very heavy one day, but very light the next day for many reps and total volume.
• Vary your rep ranges. I want you to know your 8RM, 10RM, 15RM, and 20RM just as well as you know our 1, 3, and 5RM. Think rep work doesn’t build strength? Go tell that to the Juggernaut guys who are currently laying waste to the powerlifting and strongman fields.
• Along the lines of varying intensity and rep ranges, train sub-maximally for the majority of your lifting. The idea that you need to be at >90% to make progress is bullshit.
• Don’t miss lifts. Ever.
• Don’t train to failure. Training to failure is training to fail. You’ll also significantly increase the amount of time you need to recover, which kind of throws a wrench in deadlifting frequently.

Consider this your written permission to deadlift two, three, even four times per week if it continues to test well and you continue to make progress. Don’t let someone else’s bad idea be your limitation. Go and get after it.

 

P.S. If you’re not sure how to put this into practice, my deadlift book Off The Floor gives you a comprehensive plan of how to deadlift frequently, including using your biofeedback, for maximal strength gains. This template is the exact template I used to skyrocket my deadlift from a measly 245 pounds to not one but three different 600+ pound deadlifts in 3 variations, including a world record.

 

Warning: There is no science on the road ahead. If you’re looking for a bunch of pubmeds and a strong empirical case, you’re not going to find one. This is simply my informed opinion developed over years of observation and practice.

As I was wrapping up the final edits on Off The Floor I had a realization. I completely left out single-leg deadlifts. I mean, I didn’t even mention them. In a book that I set out to be comprehensive about deadlifting, my instant reaction was that it was a pretty big oversight. Upon a moment of reflection however, I realized I left them out for a reason. I neglected the single-leg deadlift because frankly, I think they’re a bad idea the vast majority of the time. If you want to get really ridiculously strong, they might not even have a place at all. More “athletic”, whatever that means? Maybe. But the ways I see them being used? Not so much at all.

One of the paradigms I use to look at the tissues of the body, and think about training the body is that of a spectrum between elasticity and rigidity (or plasticity.) As a quick aside, when most people think of the word plasticity they think of the ability to me molded, or malleability. This is not inaccurate, but when we talk about the body a plastic deformity is a deformity from which the tissue will never return to it’s original shape. An elastic deformity is a change in shape to which the tissue will return to its exact original shape.

All of the tissues in the body exist on this spectrum. The most elastic tissue in the body, the brain, is constantly changing and adapting. Think about how quickly you can learn a new skill. Literally from one minute to the next you can not know how to do something, have someone show you, and now you are able to do it (depending on the level of skill required, of course.) For this to happen, tissue changes are physically occurring in your brain. On the other end of the spectrum, it can take years for bone remodeling to occur.

What the hell does any of this have to do with the single-leg deadlift?

From what I’ve seen, there are two types of people who perform single-leg deadlifts:

1. Those that aren’t strong enough to perform it correctly, with good biomechanics.
2. Those that are strong enough to perform it correctly with good biomechanics, and are strong enough to hurt themselves doing it.

The second type of person is actually the one that I am the most interested in, but I will address the first type in a moment. The stronger person, with good mechanics, is able to transmit a tremendous amount of force through Bret Contreras’ favorite part of the body, the lumbo pelvic hip complex. If you consider a contra-lateral single-leg deadlift with one foot off the ground, and the weight in the opposite hand of the working leg, you have a long lever (the entire upper body) transferring all of the leverage of the weight through – essentially – the one hip socket. What happens when you transfer a lot of force through the body? You increase rigidity. It’s one of the reasons we train and lift heavy weights. Stronger bones, bigger muscles, and tougher connective tissue.

However, in general, people who are strong are the ones who actually need more elasticity in their body – not more rigidity. Think of how the 800lb squatting powerlifter moves. Certainly the rigidity he has developed in his body helps him be able to squat 800, but are you telling me that a few yoga classes wouldn’t help him move a little better in the rest of the world? In my experience, not only will a little return to elasticity help him move better in general, but he’ll squat better too.

The actual case I see this most often in is the fitness aficionado who has some lower back pain or “SI” pain issues. They read some articles about how single-leg deadlifts are the holy grail of fixing everything, and they get to work doing unilateral everything. What happens? The pain issues get worse. Why? Well, in these particular cases I believe it’s because they’re introducing even more rigidity when what they need is more elasticity.

So what about the person who isn’t strong enough to do it with good biomechanics? Wouldn’t the rigidity help them? Yes, probably. But we want rigidity in the right places, right? In that case, the better way to build rigidity in the right places is to simply use heavier weights like you can with a bilateral deadlift. I’ve observed this time and time again with my general population clients at The Movement Minneapolis. Within the first few months, most people aren’t even strong enough to balance on one leg to perform a SLDL. After a few months of bilateral deadlift work, they can easily perform a solid SLDL. Which still happens very rarely because of the logic I outline here.

Does that mean the single-leg deadlift has no place at all? Absolutely not. And in fact, I think you negate a lot of the problems with it simply by touching a toe to the ground, or raising a foot up on a box as in a Bulgarian Split Squat so that some of that stablizing force has somewhere to go, other than calling on the LPHC to do it all. I am not saying you should never ever do single-leg deadlifts – but I am saying use sparingly. And if you’re currently in back pain – drop them completely the fuck out of your program.

Long before someone decided to call standing on an exercise ball like a circus penguin functional training, there were movements that served legitimate functions and purposes. Let’s face it, a squat might be a fantastic exercises because of the tremendous muscular recruitment throughout the whole body – but how did the weight get there? You stepped into a specially manufactured cage, with the weight already in place, and took it upon your shoulders.

Barring the use of a squat rack, you’d have to get the weight there in the first place. Enter the Steinborn Squat. This movement was named after Henry “Milo” Steinborn, who was known to take a bar loaded to over 500lbs from the ground, tip it onto the back, and squat it for repetitions before placing it back on the ground the same way it came.

Shortly after I started practicing this movement, one of my clients, who is a tradesman, pointed out that this is exactly how they would hoist several-hundred pound bundles of steel rebar onto their backs to carry it. Talk about functional exercise.

But there are few exercises that will rustle the jimmies of uninformed onlookers like the Steinborn Squat. Do this in a commercial gym and you’re virtually guaranteed to have a manager ask you to sign an additional liability waiver.

The Steinborn Squat appears to be the holy trifecta of spine-exploding madness. You’ve got heavy weight, a bending spine, and MOVEMENT! Surely you’d be cruisin’ for a bruisin’.

Here’s the deal. The body can move in more ways than we can count. That includes the spine. No one looks at a Cirque du Soleil performer and assumes that they’re going to be in a wheelchair in the next moment because they’re moving, bending, flexing, twisting, and extending their spine. As soon as weights get involved, the whole mindset changes.

Here’s where the real problems happen:

1. When you don’t move the body in a way it can move.
2. When you move the body outside of its limits.

I help a lot of people get out of back pain. I’m not going to load a bar to 225 and ask them to Steinborn it the first day they walk in my gym. Within the first month, however, I miiiiight have them test out a Steinborn Bend (part of the progression I’m going to teach you) to reintroduce a movement to their body they are lacking.

Likewise, my spine isn’t going to shoot out my ass because I’m doing a 300lb Steinborn any more than yours is when you do a deadlift with perfect form and a neutral spine.

Capisci?

Enough! Learn It:

At The Movement Minneapolis, we’ve developed a bit of a teaching progression for the Steinborn. Not because it’s important that everyone learn to do it, but more because certain components of it can be useful without doing the whole thing – and then some people want to learn the whole thing.

Prerequisite: You should be able to squat your body weight on a bar, with good form, to below parallel. If you can’t do that, proceed at your own risk. Actually, proceed at your own risk anyway.

Steinborn Bend

The Steinborn Bend is a movement we came up with that teaches the deep squat lean or bend that is the primary movement in the Steinborn. We have people start out with a PVC, and move up to a bar or more.

1. Put the bar across your back.
2. Drop into a deep squat, as deep as you possibly can.
3. Tip the bar to the side, touching the end of the bar to the floor if possible.
4. Return to an upright position, and then repeat on the opposite side.
5. After finishing all your repetitions, stand back up with the bar.

Anderson Squat

The Anderson squat is a variation in which the bar starts out on the pins in a power rack, you set up in the bottom  of a squat position, and then stand up with the bar from there. It’s similar to a box squat in the sense that there is no stretch, and no eccentric component of lowering with the weight before reversing direction. You are required to produce force from a “cold” start. The exact height you start from will depend on you, your squat, and the weight you intend to use. Play with it.

1. Set a power rack to a height where the bar will sit somewhere in the range of the bottom of your squat position.
2. Wedge yourself underneath the bar into your bottom position.
3. Drive the weight up to lockout.
4. Lower the weight back to the pins under control. Rest for a second or two to allow all the elastic reflex to dissipate, and then begin your next rep.

Steinborn Squat

The moment you’ve been waiting for. You’re going to back squat, without the user of a squat rack. Never again will you be frustrated by someone curling in the squat rack. Let’s go over the basics, then I’ll cover some tips from experience.

1. Place a loaded barbell on the floor. Rubber matted floors work well so that the bar end doesn’t slip, otherwise you might need something to shove the end of the bar into so it doesn’t slide. Grabing the free end of the bar with both hands, upend it so that one end is on the ground, and the other is nearly vertical, supported by you.
2. Place your left hand roughly on the power ring closest to the ground, and the right hand on the power ring closest to the ceiling. The bar will be to the left of your body in this position.
3. Bend over, positioning yourself roughly in the center of the bar, with it tilted at a slight angle to vertical, and the bar running across the top of your upper back just like you would have it in a back squat.
4. When you’re ready, drop your hips and butt, thereby lowering the bar towards you. When the bar is straight across your back, and parallel to the floor, stand up. Do this slowly and deliberately at first.
5. Perform squat repetitions.
6. Reverse the movement to return the bar to the floor under control. Dump it off your back if you have bumper plates and you’re a sissy.

Here are some notes from my experience:

• There is a trade-off between squatting deeper to make it easier to tilt the bar over, and making it harder to stand back up. Find the sweet spot where you aren’t getting buried by the bar, but you can still get the bar tilted on to your back. If you can stand up from the very, very, very bottom of a squat with heavy weight then good for you. Let that sumbitch bury you, and do your thang.
• The speed at which the tilt, “catch”, and initial standing up from the squat occurs will vary based on your strength and the weight you’re attempting. Ideally, you’d take advantage of as much stretch reflex as possible, and rebound from the weight coming down right up into lockout.
• You can “pull” down on the high end of the bar to lever it onto your back, rather than relying completely on the bend in the torso and a deep squat to allow the bar to reach parallel in the back squat position.
• Play with your hand position, and the position at which you “lever” the bar. Hint: dead center of the bar maybe not be the strongest position.
• Move your feet around in step 3 and 4 to find good leverage. Hint: dead symmetrical definitely is not the best position.

Fear Not

Armchair experts on the Internet love to fear monger about how if you move the body in any other way than what they deem to be acceptable it’s going to explode. Work within your limits, but explore your capabilities and find out what is possible. You can do some pretty amazing things.